Address: 241 Nguyen An Ninh Street, Long An Ward, Tay Ninh Province, Vietnam Call: +84 394 552 839
PK LASERTẬN TÂM TẬN LỰC
Home / Solutions / Fiber Laser Cutting Machine Accessories: Every Type, When to Replace and How to Choose

PK LASER · PK LASER Joint Stock Company

Fiber Laser Cutting Machine Accessories: Every Type, When to Replace and How to Choose

Fiber laser cutting machine accessories: nozzles, protective lenses, focusing and collimating lenses, ceramic rings, sensors, cutting heads and laser sources. When to replace and how to choose the right code. Zalo: 0394 552 839.

Consumables: nozzles, protective lenses, ceramic rings

These are replaced most often, so keep spares to avoid downtime. Nozzles and protective lenses come in many sizes (for example D28 and D32 nozzles; D27.9, D30 and D37 lenses), so record the exact sizes your machine uses.

  • Nozzle: replace when the opening is worn, deformed or dented, covered in dross, or the kerf drifts or widens.
  • Protective lens: replace when burned, pitted or cloudy, or when cutting weakens.
  • Ceramic ring: replace when cracked, chipped or loose, or when the height sensor alarms.
  • Lens-cleaning swabs and other accessories: used every time the lens is cleaned.

Optics: focusing and collimating lenses

These lenses sit inside the head. They are replaced less often but cost more, and usually fail when the protective lens was not changed in time. Replace them in a clean area and in the right orientation; leave it to a technician if you lack experience.

  • Focusing lens: focuses the beam onto the sheet; burns or cracks cause a clear loss of power.
  • Collimating lens: makes the beam from the fiber parallel.

Sensors and cables

The sensor measures the nozzle-to-sheet distance. A faulty sensor or broken cable makes the head bob, raise alarms or even crash into the sheet. PK LASER supplies cutting-head sensors and sensor cables for Raytools, Precitec, WSX and Hans heads.

Cutting heads and laser sources

PK LASER supplies cutting heads and replacement parts for Raytools, BOCI, WSX, Precitec and Ospri, with separate guides for Raytools, BOCI and WSX. Laser sources from Max, Raycus and IPG and fiber cables are also available. When a source seems weak, check the protective and internal lenses first: many "weak source" cases are really dirty lenses. For handheld laser welders, PK LASER supplies welding protective lenses and welding nozzles.

Three steps to the right part code

Always turn off laser emission and gas before changing parts on the cutting head. Fiber laser light is invisible and can cause permanent eye damage.

  • Identify the brand and model on the head label or in the control software.
  • Measure or photograph the old part: lens diameter and thickness, nozzle size and thread, ceramic ring type.
  • Send the photos on Zalo 0394 552 839 so a technician confirms the code before delivery.

Quick answers

Spares worth keeping: nozzles, protective lenses and ceramic rings of the right code, the three parts that fail most suddenly. PK LASER is at 241 Nguyen An Ninh, Long An Ward, Tay Ninh Province, with delivery and on-site technical support in Ho Chi Minh City, Long An, Tay Ninh, Binh Duong and the Mekong Delta. If cutting is still poor after replacing parts, check focus, gas pressure and nozzle centering, or book PK LASER's repair and maintenance service. Zalo: 0394 552 839. Technical line: 0394 542 839.

Contact us

Business inquiries: +84 394 552 839

Technical support: +84 394 542 839

Email: pklasercnc@gmail.com