Address: 241 Nguyen An Ninh Street, Long An Ward, Tay Ninh Province, Vietnam Call: +84 394 552 839
PK LASERTẬN TÂM TẬN LỰC
Home / Solutions / BOCI BLT Laser Cutting Head (BLT310, BLT421, BLT441, BLT642H): Parts and Common Faults

PK LASER · PK LASER Joint Stock Company

BOCI BLT Laser Cutting Head (BLT310, BLT421, BLT441, BLT642H): Parts and Common Faults

BOCI BLT smart cutting heads BLT310, BLT421, BLT441, BLT642H: spare parts, choosing the right code and fixing common faults. Zalo: 0394 552 839.

BOCI heads supplied by PK LASER

The BOCI BLT series are smart auto-focus cutting heads widely used on mid- and high-power fiber cutting machines. PK LASER supplies the BLT310, BLT421, BLT441 and BLT642H. Each model suits a different power range; send your laser power, material and thickness on Zalo for a recommendation.

Spare parts for BOCI heads

BOCI parts must match the exact head model. Send a photo before buying.

  • Protective lens: replace when burned, pitted or cutting weakens.
  • Focusing lens: replace when burned or cracked.
  • Ceramic ring: replace when cracked, chipped or causing sensor alarms.
  • Nozzle: replace when dented, worn or covered in dross.
  • Height sensor: check when height tracking is unstable.

How to choose the right part code

  • Read the exact model on the head label (BLT310, BLT421…).
  • Measure or photograph the old part: lens size, nozzle thread, ceramic ring type.
  • Send the photos on Zalo 0394 552 839 to confirm the code before delivery.

Common faults and what to check

Cutting gets weaker: check the protective lens first.

Height-sensor alarm: check nozzle, ceramic ring, sheet, capacitance calibration, then the cable.

One-sided burrs: replace the nozzle and re-center it with tape.

Auto-focus misses the focus point: check the focus parameters in the control software and the limit-switch signal. If it repeats, contact a technician instead of opening the motor assembly.

Maintenance

  • Turn off laser emission and gas before removing lenses, nozzles or ceramic rings.
  • Check the protective lens every shift.
  • Check nozzle and ceramic ring after every collision.
  • Run capacitance calibration after replacing the nozzle or ceramic ring.
  • Drain water and check the air filter and dryer regularly.

Repair and on-site support

PK LASER inspects BOCI heads, replaces parts and fixes sensor faults, with on-site support in Ho Chi Minh City, Long An, Tay Ninh, Binh Duong and the Mekong Delta. Zalo: 0394 552 839. Technical line: 0394 542 839.

Contact us

Business inquiries: +84 394 552 839

Technical support: +84 394 542 839

Email: pklasercnc@gmail.com